RFM01 – обновление ревизии кристалла трансивера RFM01 – обновление ревизии кристалла трансивера Автор Different 20.10.2008 г.
Внимание!
Dear Customers,
The version of RF01 (RFM01) we will provide in the future is J1 and the former version is J. This file is the detailed difference between J and J1. Please refer to it.
Prior Product Revision #: J New Product Revision #: J1
Wake Up Timer calibration
The control of the wake up timer’s internal calibration has been changed to prevent an unnecessary XOSC on state
Wake Up Timer startup
The Wake Up Timer has been modified to provide faster start up
Unlocking of the PLL in 315MHz band
The reference clock duty cycle was tuned closer to 50%, which eliminated the 315MHz PLL lock issues
Unknown VDI state when the receiver chain is switched off
VDI is set to logic low when receiver chain is switched off
When the device wakes from sleep mode, no clock is available on the CLK (PIN 8)
The modifications eliminated this problem
If the uC CLK output was used in LPDM mode, the internal logic control did not switch off the crystal oscillator during the idle period of the LPDM cycle